Sony DVP-LS785V Operating Instructions Manual page 18

Note
When connecting to a progressive TV, it is
recommended that you use only pattern A. If you
If you are connecting to a monitor, projector, or AV amplifier
A
(receiver) having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and press the
PROGRESSIVE button on the front panel to output progressive signals. For details, see "Using
the PROGRESSIVE button" (page 19).
If you are connecting to a SCART input jack
B
Connect a SCART cord (not supplied). Be sure to make the connections firmly to avoid hum and
noise. When you connect using the SCART cord, check that the TV conforms to S video or RGB
signals. Refer to the operating instructions supplied with the TV to be connected. Also, when
you set "LINE" to "S VIDEO" or "RGB" under "SCREEN SETUP" in the Setup Display
(page 82), use a SCART cord that conforms to each signal. For DVP-NS955V, be sure to
connect your TV to the LINE 1 (RGB)-TV jack on the player.
With this connection, select "NORMAL (INTERLACE)" (default) by pressing the
PROGRESSIVE button on the front panel.
If you are connecting to a video input jack
C
Connect the yellow plug of an audio/video cord (supplied with UK models) to the yellow (video)
jack. You will enjoy standard quality images.
With this connection, select "NORMAL (INTERLACE)" (default) by pressing the
PROGRESSIVE button on the front panel.
If you are connecting to an S VIDEO input jack
D
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
With this connection, select "NORMAL (INTERLACE)" (default) by pressing the
PROGRESSIVE button on the front panel.
18
Green
Blue
Red
Yellow
White (L)
Red (R)
connect to your TV using both A and B, a special
control signal transmitted via the SCART cable
may cause the signal to be switched to the SCART
jack.
Green
Blue
Red
Yellow
White (L)
Red (R)
/C , P /C )
B B R R