Sony DVP-LS785V Operating Instructions Manual page 53

Notes
• While playing a Super VCD on which the audio
track 2 is not recorded, no sound will come out
when you select "2:STEREO," "2:1/L," or
"2:2/R."
• You cannot change the sound for Super Audio
CDs.
Checking the audio signal
format
You can check the audio signal format by
pressing repeatedly during playback.
The format of the current audio signal (Dolby
Digital, DTS, PCM, etc.) appears as shown
below.
When playing a DVD VIDEO
Example:
Dolby Digital 5.1 ch
Rear (L/R)
1 : ENGLISH DOLBY DIGITAL
Front (L/R)
+ Centre
Example:
Dolby Digital 3 ch
Front (L/R)
2 : SPANISH DOLBY DIGITAL
LFE (Low
Frequency Effect)
3 / 2 .1
L C R
LFE
LS RS
Currently playing
programm format
Rear (Monaural)
2 / 1
L R
S
Currently playing
programm format
When playing a DivX video file on a DATA
CD or a DATA DVD
Example:
MP3 audio
1:
MP3 128k
Bit rate
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound's
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
53