Step 4: Connecting The Audio Cords - Sony DVP-LS785V Operating Instructions Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects:
– TVS DYNAMIC (page 54)
– TVS WIDE (page 54)
Stereo amplifier (receiver) and 2 speakers
• Surround effects:
– TVS STANDARD (page 54)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 54)
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 94)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 94)
– DTS (5.1 ch) (page 94)
– Super Audio CD Multi channel (page 94)
– MPEG audio (5.1 ch) (page 94)
or
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS*
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 94)
– DTS (5.1 ch) (page 94)
– MPEG audio (5.1 ch) (page 94)
through
A
Connection
1
2
, or MPEG audio
.
D
Your setup (example)
(page 23)
A
(page 24)
B
(page 25)
C
(page 26)
D
21
,continued