Sony DVP-LS785V Operating Instructions Manual page 27

: Connecting to the 5.1 ch input jacks
D-1
You can enjoy 5.1 ch surround sound using
the internal Dolby Digital, MPEG audio,
DTS, or Super Audio CD Multi decoder of
this player. Note that 7.1-channel MPEG
signals are mixed down to 5.1-channel
signals.
: Connecting to a digital input jack
D-2
This connection will allow you to use the
Dolby Digital, MPEG audio, or DTS decoder
function of your AV amplifier (receiver). You
are not able to enjoy the surround sound
effects of this player.
z Hints
• For connection D-2
For correct speaker location, refer to the operating
instructions of the connected components.
• To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and centre speakers of the same
size and performance.
– Place the subwoofer between the left and right
front speakers.
Notes
For connection
D-2
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "DTS" in Quick Setup
(page 28). If your AV amplifier (receiver) has an
MPEG audio decoder function, set "MPEG" in
"AUDIO SETUP" to "MPEG".
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 86).
• Super Audio CD audio signals are not output from
the DIGITAL OUT jack.
27