Playing Discs - Sony DVP-NC655P Operating Instructions Manual

Playing Discs
Depending oll the DVD or VIDEO CD, some
operaiions may be different or restricted.
Refer to the operating instructions supplied
with your disc.
Power
I/_) indicator _
A m--
AUDIO -_-
[_>---
DISC SKIP
-_ ,@- ....t/d)
i/
, 4
a_. DISC SKIP
1
Turn on yourTV.
2
Press I/(_.
]'he player turns on and the power
indicator lights up in green.
3
Switch the input selectoron your
TV so that the signal from the
player appearson the TV screen.
• When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select lhe appropriate channel so that you
can hear sound from the player.
4
PressA onthe player, and place a
disc on the disc tray,
To place oiher discs on the tray, press
DISC SKIP and place lhe discs in lhe
order you want to play 1hem.
Each time you press DISC SKIP, lhe disc
fray turns so you can place the discs on
the emply compartments. The player
ploys fi'om lhe last disc placed on the tray.
With the playback compartment
side facing down number
5 PressI_-.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 33. For VIDEO CDs,
see page 34.
To turn off the player
Press I/(_).The player enters standby mode.
';_" Hint
You can have the player turn off- automaticaUy
whenever you leave it in stop mode for more than
30 minu_es. To turn on this function, set "AUTO
POWER OFF" in "CUSTOM SETUP" to "ON"
(page 7!).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage lo lhe audio system, the consumer
should take proper precautions when ihe
analog stereo jacks of the player are
connected lo an amplificafion system. To
enjoy DTS Digital Surround IMplayback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
28