Playing Discs - Sony DVP-NS725P Operating Instructions Manual

Playing Discs D
Depending on the DVD or VIDEO CD, some
operations may be different or restricted
Refer lo the operating instructions supplied
with your disc.
AUDIO .._ -._
1
Turn on yourTV.
2
Press I/(_.
The player turns on
3
Switch the input selectoron your
TV so that the signal from the
player appears on the TV screen.
• When using an amplifier (receiver)
'rum on the amplifier (receiver) and
select the appropriate channel so that yon
can hear sound from the player.
4
Press _" onthe player, and place a
disc on the disc tray.
With the playback side facing down
5 Press1:>.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 29. For VIDEO CDs, see page 29.
To turnoff the player
Press I/(_. The player enters standby mode.
'_;* Hint
YOU can have tile player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, sel "AUTO
POWER OFF" in "CUSTOM SETUP" to "ON"
(page 61 ).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system To
enjoy DTS Digital Surround
TM
playback, an
external 5.l-channel decoder system must
be connected to the digital jack of the
player.
• Set the sound to "STEREO" using the
AUDIO button when you play DTS sound
tracks on a CD (page 45).
• Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs Ihe DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if"DTS" in "AUDIO SETUP" is
set to "OFF" in the Setup Display (page 63),
and may affect your ears or cause your
speakers to be damaged.
26