Adjusting The Picture Quality (Bnr) - Sony DVP-K360 Operating Instructions Manual

Repeating a Specific Portion (A-B Repeat)
4
When you reach the ending point (point B), press
ENTER again.
The set points are displayed and the player starts
repeating this specific portion.
"A-B" appears on the front panel display during A-B
repeat play.
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 34 : 30
ON
CHAPTER TIME
A: 18 – 1 : 32 : 55
B: 18 – 1 : 34 : 30
A–B REPEAT
Select:
ENTER
To stop A-B Repeat Play
Press CLEAR on the remote.
Notes
• You can set A-B Repeat for only one specific section.
• A-B Repeat is canceled when:
– you open or close the disc tray
– the player enters standby mode by pressing ?/1 on the
remote
– you turn the power off by pressing POWER on the player
• When you set A-B Repeat, the settings for Shuffle Play, Repeat
Play and Program Play are canceled.
• You may not be able to set A-B Repeat for some DVD or VIDEO
CD scenes.
44
PLAY
DVD
Adjusting the Picture
Quality (BNR)
The Block Noise Reduction (BNR) function adjusts the
picture quality by reducing the "block noise" or mosaic
like patterns that appear on your TV screen.
Select "BNR" after pressing DISPLAY. If you select any
setting other than OFF, the "BNR" indicator lights up in
green.
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
OFF
1
2
3
OFF
Indicator
BNR
Select:
x BNR
The default setting is underlined.
• OFF: resets the BNR setting.
• 1: reduces the "block noise."
• 2: reduces the "block noise" more than 1.
• 3: reduces the "block noise" more than 2.
Notes
• If the outlines of the images on your screen should become
blurred, set BNR to "OFF."
• Depending on the disc or the scene being played, the BNR
effect may be hard to discern.
PLAY
DVD
Cancel:
ENTER RETURN