Table of Contents
Advertisement
Changing the Sound
Displaying the audio information of the
disc
When you select "AUDIO," the channels being played are
displayed on the screen.
In Dolby Digital format, multiple signals ranging from
monaural to 5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number of the
recorded channels may be different.
1 2 ( 2 7 )
1 8 ( 3 4 )
T
1 : 3 2 : 5 5
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
LS
AUDIO
Select:
ENTER
* "PCM," "DTS," "DOLBY DIGITAL" or "MPEG" is
displayed. In case of "DOLBY DIGITAL," the channels
in the playing track are displayed by numbers as
follows:
For Dolby Digital 5.1 ch:
Front component 2
Rear component 2
+ Center component 1
DOLBY DIGITAL 3 / 2. 1
KARAOKE
Dolby Digital
Karaoke format
(see page 46)
** The letters in the program format display mean the
following sound component:
L:
Front (left)
R:
Front (right)
C:
Center
LS:
Rear (left)
RS:
Rear (right)
S:
Rear (monaural) – the rear component of the
Dolby Surround processed signal or the Dolby
Digital signal.
LFE: LFE (Low Frequency Effect)
32
PLAY
DVD
Current
audio
format*
C
R
Current
LFE
playing
program
RS
format**
LFE (Low
Frequency Effect)
component 1
The display examples are as follows:
•PCM (stereo)
1: ENGLISH
PROGRAM FORMAT
PCM 48kHz 24bit
AUDIO
Select:
ENTER
•Dolby Surround
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
AUDIO
Select:
ENTER
•Dolby Digital 5.1ch
"LFE" appears only when a disc contains an LFE signal
component. "LFE" remains on the "PROGRAM
FORMAT" display even if the LFE signal component is
not being output.
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
LS
AUDIO
Select:
ENTER
•MPEG
1: ENGLISH
PROGRAM FORMAT
MPEG 2/2
L
LS
AUDIO
Select:
ENTER
L
C
R
S
C
R
LFE
RS
R
RS
Advertisement
Table of Contents
