Adjusting The Picture Quality (Bnr); Adjusting The Playback Picture (Custom Picture Mode); Enhancing The Playback Picture; Enhancer) - Sony DVP-F25 Service Manual

To turn off the subtitles
Select "OFF" in Step 2.
Note
Depending on the DVD, you may not be able to
change the subtitles even if multilingual subtitles
are recorded on it. You also may not be able to turn
them off.
52
• CINEMA 2: White colours become
brighter and black colours become
richer, and the colour contrast is
increased.
z Hint
When you watch a movie, "CINEMA 1" or
"CINEMA 2" is recommended.
54
Adjusting the Picture
Quality
(BNR)
The Block Noise Reduction (BNR) function
adjusts the picture quality by reducing the
"block noise" or mosaic like patterns that
appear on your TV screen.
1
Press DISPLAY twice during
playback.
The following Control Bar appears.
2
Press C/c to select
(BNR),
then press ENTER repeatedly to
select a level.
1
• 1: reduces the "block noise."
• 2: reduces the "block noise" more than
1.
• 3: reduces the "block noise" more than
2.
Enhancing the Playback
Picture
(DIGITAL VIDEO

ENHANCER)

The Digital Video Enhancer (DVE) function
makes the picture appear clear and crisp by
enhancing the outlines of images on your TV
screen. Also, this function can soften the
images on the screen.
ENTER
DISPLAY
1
Press DISPLAY twice during
playback.
The following Control Bar appears.
2
Press C/c to select
(DIGITAL
VIDEO ENHANCER), then press
ENTER repeatedly to select a
level.
1
• 1: enhances the outline.
• 2: enhances the outline more than 1.
• 3: enhances the outline more than 2.
• SOFT: softens the image (DVD only).
To cancel the "BNR" setting
Select "OFF" in Step 2.
To turn off the Control Bar
Press DISPLAY repeatedly until the Control
Bar is turned off.
Notes
• If the outlines of the images on your screen should
become blurred, set "BNR" to "OFF."
• Depending on the disc or the scene being played,
the "BNR" effect may be hard to discern.
To cancel the "DIGITAL VIDEO
ENHANCER" setting
Select "OFF" in Step 2.
To turn off the Control Bar
Press DISPLAY repeatedly until the Control
Bar is turned off.
Note
Depending on the disc or the scene being played,
noise found in the disc may become more apparent.
If this happens, it is recommended that you use the
BNR function (page 52) with the DVE function. If
the condition still does not improve, reduce the
Digital Video Enhancer level, or select "SOFT"
(DVD only) in Step 2 above.
1-13
Adjusting the Playback
Picture
(CUSTOM PICTURE MODE)
You can adjust the video signal of the DVD or
VIDEO CD from the player to obtain the
picture quality you want. Choose the setting
that best suits the programme you are
watching.
1
Press PICTURE MODE during
playback.
The following Control Bar appears.
DYNAMIC 1
2
Press PICTURE MODE repeatedly
to select the setting you want.
The default setting is underlined.
• STANDARD: displays a standard
picture.
• DYNAMIC 1: produces a bold
dynamic picture by increasing the
picture contrast and the colour
intensity.
• DYNAMIC 2: produces a more
dynamic picture than DYNAMIC 1 by
further increasing the picture contrast
and the colour intensity.
• CINEMA 1: enhances details in dark
areas by increasing the black level.
c continued
53
55