Huawei SUN2000-45KTL-US-HV-D0 User Manual page 97

SUN2000-45KTL-US-HV-D0
User Manual
No. Parameter Description
7 Crystalline This parameter
silicon PV reduces the DC
compensati voltage of PV modules
on mode to the PE by reducing
the impedance of the
SUN2000 input side to
the PE, thereby
effectively reducing
PID effect of PV
modules.
8 Communic The standards of
ation certain countries and
interrupt regions require that
shutdown the SUN2000 must
shut down after the
communication is
interrupted for a
certain time.
9 Communic Specifies the duration
ation for determining
Issue 04 (2018-06-01)
Default
Unit
Value
N/A Output
disabled
N/A Disable
min 30
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Man-Machine Interactions
Value Range Remarks
−

Output This parameter is
disabled displayed if PV
module type is set
 P-type output
to Crystalline

N-type output
silicon. Set this
parameter to P-type
output for P-type
PV modules and
N-type output for
N-type PV modules.

Disable If Communication
interrupt

Enable
shutdown is set to
Enable and the
SUN2000
communication has
been interrupted for
a specified time (set
by Communication
interruption
duration), the
SUN2000 will
automatically shut
down.
[1, 120] N/A
quickly
restart in 60
minutes when
the input
power of PV
modules
drops
drastically
due to
shading.
If PV module
type is set to
CPV 2, the
inverter can
quickly
restart in 10
minutes when
the input
power of PV
modules
drops
drastically
due to
shading.
91