Table of Contents
Advertisement
SUN2000-45KTL-US-HV-D0
User Manual
Figure 6-22 Stripping an RS485 communications cable
Step 4 Remove the cable terminal base from the terminal block. Connect the communications cable
to the terminal base.
Figure 6-23 Connecting cables to a terminal base
(1) RS485A IN
(3) RS485B IN
Step 5 Install the terminal base on the terminal block, and bond the shield layer to the ground point.
When connecting the shielded cable, crimp the OT terminal if required.
Issue 04 (2018-06-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) RS485A OUT
(4) RS485B OUT
6 Electrical Connections
60
Advertisement
Table of Contents
