Service Life / Warranty; Requirements For The Installation Location - BOCK Stellar Assembly And Operation Manual

areas. Always pay attention to objects that are near or even below the comfort/nursing
care bed. This can lead to damages.
The permitted person's weight depends on the total weight of the equipment that has
been mounted to the bed (mattresses and other electronic medical devices). For safe
working load, please refer to the type plate on the lying surface frame of the bed.
1.4

Service life / warranty

This comfort/nursing care bed was developed, designed and manufactured for a safe op-
eration over a long period of time. With proper operation and maintenance, this com-
fort/nursing care bed has an expected service life of 15 to 20 years. The service life de-
pends on operating conditions and frequency.
Attention: Unauthorised technical changes to the product voids all warranty claims.
This product is not approved for the North American market, particularly not for the
United States of America (USA). Distribution and use of the comfort/nursing care bed in
these markets, including through third parties, is prohibited by the manufacturer.
1.5

Requirements for the installation location

The company Hermann Bock GmbH is not liable for damages which might arise from the
daily usage on the floor.
To avoid floor indentations, floor should correspond to the recommendations of the FEB
- Fachverband der Hersteller elastischer Bodenbeläge e. V. (Association of Elastic Floor
Coverings Manufacturers). To do this, the technical information FEB No. 3 can be refer-
enced.
Simultaneous use of electrical appliances particularly in the vicinity of the operational com-
fort/nursing care bed may result in small electromagnetic interactions of these electric devices,
e.g. static noise in the radio. In such rare events, increase the distance of the devices. Do not use
the same socket or temporarily switch off the interference source and/or the disturbing or dis-
turbed device.
If the comfort / nursing care bed is operated with electrical or medical devices contrary to its
intended purpose, the functions of the comfort / nursing care bed must first be deactivated for
the duration of use via the integrated locking function in the hand control.
Hazard note from Bock
7