Installing The Monitor Sun Hood - Hugyfot Vision Sony RX100 IV/V User Manual

5. Installing the monitor sun hood

Install the monitor sun hood prior to using your Hugyfot Sony RX100 IV/V
housing. This reduces glare, unwanted reflections and protects your monitor
when opening or closing your housing.
The sun hood of your Hugyfot Sony RX100 IV/V housing is fastened with 3
thumb nuts. To install the sun hood, loosen thumb nuts (1). Do not completely
remove thumb nuts!
Once all 3 thumb nuts are loose, install the sun hood by sliding it into place (2).
With the sun hood in place, carefully finger tighten the thumb nuts, securing
it in place (3).
With the sun hood installed, your Hugyfot Vision Sony RX100 IV/V housing
can now be opened or closed, provided your housing is placed on a flat stable
surface, with the monitor face down.
The sun hood of your Hugyfot Sony RX100 IV/V housing is secured
with 3 thumb nuts (left, top, right).
1 2 3
Hugyfot 6
User Manual Vision Sony RX100 IV/V