Opening And Closing The Housing - Hugyfot Vision Sony RX100 IV/V User Manual

6. Opening and closing the housing

Your Hugyfot Sony RX100 IV/V housing is equipped with a rotary secure lock
mecha nism. Open or Close your housing by turning both rotary secure locks at
the same time.
Opening the housing:
- Place your Hugyfot Sony RX100 IV/V housing on a flat stable surface, with the
monitor face down. Ensure the monitor sun hood is installed prior to ope-
ning your housing (See step No. 5 - Table of Contents).
- Turn both Rotary secure locks at the same time until notches are facing up
(see picture below).
open
- Once retaining pins are visible through the rotary secure lock notches, the
front cover of your Sony RX100 IV/V housing can be lifted. Your hou-
sing is now open.
Closing the housing:
- Place your Hugyfot Sony RX100 IV/V housing on a flat stable surface, with the
monitor face down.
- Your Hugyfot Sony RX100 IV/V housing has two (2) O-rings. Carefully inspect,
service and lubricate each O-ring before diving.
- Turn both Rotary secure locks at the same time until notches are facing up
(see picture below).
open
- Place the front cover of your Hugyfot Sony RX100 IV/V housing over the back
part where the rotary secure locks are located. Align cover retaining pins
with corresponding rotary secure lock notch and confirm cover sits pro-
perly in place, then proceed to turn both rotary secure locks at the same
time until retaining pins are securely locked. Your housing is now closed.
close
7
Retaining pins
are securely
locked and
your housing
is closed when
'closed' icons
are positioned
as pictured.
Hugyfot
User Manual Vision Sony RX100 IV/V
close