Installing The Monitor Sun Hood - Hugyfot Vision Hero 5 User Manual

5. Installing the monitor sun hood

Install the monitor sun hood prior to using your Hugyfot Vison Hero 5 housing.
This reduces glare, unwanted reflections and protects your monitor when open-
ing or closing your housing.
The sun hood of your Hugyfot Vision Hero 5 housing is fastened with 3 thumb
nuts. To install the sun hood, loosen thumb nuts (1). Do not completely remove
thumb nuts!
Once all 3 thumb nuts are loose, install the sun hood by sliding it into place (2).
With the sun hood in place, carefully finger tighten the thumb nuts, securing
it in place (3).
With the sun hood installed, your Hugyfot Vision Hero 5 housing can now be
opened or closed, provided your housing is placed on a flat stable surface, with
the monitor face down.
The sun hood of your Hugyfot Vision Hero 5 housing is secured
with 3 thumb nuts (left, top, right).
1 2 3
Hugyfot 7
User Manual Vision Hero 5