Monitor Sun Hood; Opening The Housing - Hugyfot Vision Xs User Manual

5. Monitor sun hood

Your Hugyfot Vision Xs GoPro housing comes with pre-installed monitor sun
hood. This reduces glare, unwanted reflections and protects your monitor
window when opening or closing the housing.
The sun hood is fastened with 3 M3 screws. It is possible to remove or replace the
sun hood by loosening the 3 screws. You can then slide the sun hood of the housing.
With the sun hood installed, your Hugyfot Vision Xs GoPro housing can safely be
opened and closed, provided it is placed on a flat stable surface with the monitor
faced down.
The sun hood of your Hugyfot Vision Xs housing is secured
with three M3 screws (left, top, right).
Hugyfot User Manual Vision Xs

6. Opening the housing

Your Hugyfot Vision Xs GoPro housing has with 2 locking latches and can also
be equipped by an optional Hugycheck Xs vacuum system.
Opening the housing:
1. Release the vacuum (if installed) by unscrewing the large vacuum valve
on the back monitor shell. Without releasing the vacuum it is impossible
to open the housing.
2. Place the Hugyfot Vision Xs GoPro housing on a flat stable surface with the
monitor (with installed sun hood) faced down.
3. Open both latches
4. You can pull gently the shells apart by using light force to the two top M16
blanking plugs or vacuum valves (if installed)
1
6