4 Monitor sun hood
Your Hugyfot Vision Xs housing comes
with pre-installed monitor sun hood.
This reduces glare and unwanted
reflections.
The sun hood is fastened with 3 M3 screws.
It is possible to remove or replace the sun
hood by loosening the 3 screws. You can
then slide the sun hood of the housing.
With the sun hood installed, your Hugyfot
Vision Xs housing can safely be opened
and closed, provided it is placed on a flat
stable surface with the monitor screen
faced down.
7
5 Opening the housing
For easy opening and closing your
Hugyfot Vision housing is equipped with
2 locking latches.
Opening the housing
1
Release the vacuum by unscrewing
the large vacuum valve on the rear
monitor shell. Without releasing the
vacuum, it is impossible to open
the housing.
2
Place the housing on a flat stable
surface with the monitor (with
installed sun hood) faced down.
3
Open both latches
4
You can pull the shells apart by
applying light force to separate
the valve part and the body part
of the HugyCheck system.
1
2
3
4
Hugyfot User Manual Vision XS For GoPro Hero 8