Table of Contents
Advertisement
5
6
9. Powering battery packs "On/Off"
With both battery packs and Sony RX100 IV/V installed, your Hugyfot Vision
Sony RX100 V housing is ready to use.
-
To power the monitor battery pack, holding your housing by the handles
facing the monitor, briefly press the top red button on the left-hand side
of the housing (1);
-
To power it down, push the button holding it for 3 seconds;
-
To power the Sony RX100 IV/V battery pack, briefly press the bottom red
button on the left-hand side of the housing (2);
-
To power it down, push the button holding it for 3 seconds;
-
With both battery packs "On", and the Sony RX100 IV/V powered up, your
monitor should be displaying images from your Sony RX100 IV/V.
1
The battery packs are equipped with 4 blue LED's to help estimate available
power (1 LED: 25%, 2 LED's: 50%, 3 LED's: 75%, 4 LED's: 100%). To review
how your battery packs are doing while diving, simply peek through the small
front window of your housing (3).
11
2
3
Hugyfot
User Manual Vision Sony RX100 IV/V
Advertisement
Table of Contents
