Housing Overview; Monitor Sun Hood; Opening The Housing - Hugyfot Vision Xs User Manual

3 Housing overview

6
1 Hugyfot Vision Xs GoPro housing
2 GoPro shutter release control
3 GoPro on/off control
4 Flat port for GoPro Hero and
LCD screen
5 Easy flip red filter with flat port cover
6 Sturdy aluminum handles with 1" ball
mounts and Zink Anodes
7 Closing latches
8

Monitor sun hood

9 Feelworld F5 4K 5" HDMI monitor
with battery
10 Monitor adjustment buttons
11 HugyCheck Xs vacuum system
12 Dual o-ring system
13 Vision Xs cradle for GoPro Hero and
its external power pack
14 External power pack for GoPro Hero
and USB-C cable
15 GoPro Media Mod (not included)
16 GoPro Hero 9 camera (not included)
17 Handle tray with center tripod hole
and 2 M6 mounting holes
Hugyfot User Manual Vision XS For GoPro Hero 9/10
1
2
7
3
7
11
10
8
4 5
15 16
14
12
9
13
17
4 Monitor sun hood
Your Hugyfot Vision Xs housing comes with
pre-installed monitor sun hood. This
reduces glare and unwanted reflections.
The sun hood is fastened with 3 M3 screws. It
is possible to remove or replace the sun
hood by loosening the 3 screws. You can
then slide the sun hood of the housing.
With the sun hood installed, your Hugyfot
Vision Xs housing can safely be opened and
closed, provided it is placed on a flat stable
surface with the monitor screen faced down.
6 7

5 Opening the housing

For easy opening and closing your Hugyfot
1
Vision housing is equipped with 2 locking
latches.
Opening the housing
1 Release the vacuum by
unscrewing the large vacuum
valve on the rear monitor shell.
2
Without releasing the vacuum,
it is impossible to open
the housing.
2 Place the housing on a flat
stable surface with the monitor
(with installed sun hood)
faced down.
3 Open both latches
4 You can pull the shells apart by
3
applying light force to separate
the valve part and the body part
of the HugyCheck system.
4
Hugyfot User Manual Vision XS For GoPro Hero 9/10