Magtek kDynamo Installation And Operation Manual page 18

2 - Installation
To disconnect kDynamo from the host, follow these steps:
1) Make sure all installed apps that use kDynamo are either closed or disconnected.
2) Power off kDynamo (see section 3.4.4 How to Power On / Wake Up from Sleep Mode / Power
Off).
3) Turn off the iPad host's display to avoid accidentally launching or interacting with apps.
4) Use your fingernail or gently use a slotted screwdriver to lift the locking tab.
5) Pull kDynamo's adapter shell and main body in opposite directions.
6) Disconnect kDynamo from the Lightning connector and slide the iPad host out of the adapter shell.
kDynamo| Secure Card Multimedia Device for iPad | Installation and Operation Manual
Page 18 of 34 (D998200284-10)