Figure 2. Stm32-Based Parking Ticket Vending Machine Demonstration Board - ST STEVAL-IPC002V1 User Manual

UM0886
The time can be set by pressing the SET function (FUNC + 9).
The 9 V adaptor is used to charge the batteries through the on-board battery charger.
To see the last 20 entries, press "FUNC" and then "6".
Figure 2.
8. To replace the thermal paper, pull the black roll out of the printer. Place the paper (50 to
52 mm width) so that the glossy side faces up as shown in
back into place. If the paper is not inserted correctly the printout may not come out
properly.
STM32-based parking ticket vending machine demonstration board
Doc ID 16916 Rev 1
Getting started
Figure 2. Put the black roll
7/30