Starting The Engine; Stopping The Engine - Polaris RZR XP TURBO S 2019 Owner's Manual For Maintenance And Safety

OPERATION

STARTING THE ENGINE

Do not apply throttle during or immediately after starting a turbo model. After
starting the engine, wait 10 seconds to allow engine oil to circulate and
1. Position the vehicle on a level surface outdoors or in a well-ventilated area.
2. Sit in the driver's seat and fasten the seat belt. Always make sure all cab
doors are closed and latched when riding in this vehicle.
3. Place the transmission in PARK.
4. Apply the brakes. Do not press the throttle pedal while starting the engine.
5. Turn the ignition key past the ON/RUN position to START. Engage the starter
for a maximum of five seconds. Release the key when the engine starts.
6. If the engine does not start within five seconds, return the ignition switch to
the OFF position and wait five seconds. Repeat steps 5 and 6 until the
engine starts.
7. After starting the engine, wait 10 seconds before applying throttle.

STOPPING THE ENGINE

1. Release the throttle pedal completely and brake to a complete stop.
2. Place the transmission in PARK.
3. After a ride, allow the engine to idle for 30 seconds before stopping the
engine. This will allow the turbo system to cool down.
4. Stop the engine.
5. Slowly release the brake pedal and make sure the transmission is in PARK
before exiting the vehicle.
84
NOTICE
lubricate the engine and turbo system.