Selecting Still Images To Print (Print Mark) - Sony MVC-FD92 Operating Instructions (primary manual) Operating Instructions Manual

4
Insert another floppy disk.
"RECORDING" appears. When
copying is completed,
"COMPLETE" appears.
To end copying, select [EXIT].
To continue copying to other
floppy disks
After "COMPLETE" appears in step 4,
select [CONTINUE] and repeat steps 3
and 4 above.
To cancel copying partway
Select [CANCEL].
Note
If you eject and insert the floppy disk
without selecting [EXIT] after
"COMPLETE" appears, DISK COPY will
be carried out onto the floppy disk.
Selecting still images
to print (PRINT MARK)
You can mark a print mark on still
images recorded with your camera.
This mark is convenient when you
have images printed at a shop that
conforms with the DPOF (Digital Print
Order Format) standard.
1
In single mode
1
Set the PLAY/STILL/MOVIE
selector to PLAY and display
the image you want to print.
2 Select [FILE], [PRINT MARK],
and then [ON] from the menu.
The (print) mark is marked on
the displayed image.
To unmark the print mark
Select [OFF] in step 2.
In INDEX mode
1
Set the PLAY/STILL/MOVIE
selector to PLAY, then
display the INDEX screen.
2
Select [FILE], [PRINT MARK],
and then [SELECT] from the
menu.
3
Select the images to be
marked with the control
button.
2, 3, 4
69