Preparing The Power Supply; Installing The Battery Pack; To Remove The Battery Pack - Sony MVC-FD92 Operating Instructions (primary manual) Operating Instructions Manual

Preparing the power supply

Installing the battery pack

Your camera operates only with the NP-F330 (supplied)/F550 (not supplied)
"InfoLITHIUM" battery pack* (L series). See page 75 for more information about
"InfoLITHIUM" battery pack.
1
1
2
Open the battery cover.
1
Slide the battery cover in the direction of the arrow.
2 Install the battery pack.
Insert the battery pack with the
as illustrated.
3 Close the battery cover.

To remove the battery pack

Open the battery cover. Slide the battery eject lever rightward, and remove
the battery pack.
Be careful not to drop the battery pack when removing it.
* What is "InfoLITHIUM"?
"InfoLITHIUM" is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. "InfoLITHIUM" L series battery packs have the
mark. "InfoLITHIUM" is a trademark of Sony Corporation.
2
v
mark facing toward the battery compartment
Battery eject lever
3 2
1
9