Charging The Battery Pack - Sony MVC-FD92 Operating Instructions (primary manual) Operating Instructions Manual

Charging the battery pack

When the camera is turned on, you cannot charge the battery pack. Be sure to turn off
the power of the camera.
1
Battery pack
Insert the battery pack into your camera.
1
Open the DC IN cover and connect the AC power adaptor to the DC
2
IN jack of your camera with the
Connect the power cord (mains lead) to the AC power adaptor and
3
then to a wall outlet (mains).
The POWER ON/OFF (CHG) lamp (orange) below the LCD screen lights up
when charging begins. When the POWER ON/OFF (CHG) lamp goes off, full
charge is completed.
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camera.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Charging at a room temperature of 10°C to 30°C (50°F to 86°F) is recommended.
10
2
to DC IN jack
to a wall outlet (mains)
v
mark facing up.
AC-L10A/L10B/L10C
AC power adaptor
Power cord
(mains lead)
3