Advertisement
User Manual
5) Advanced
HDBT Receiver
1.
POWER: This LED illuminates when the device is powered
2.
DC 24V: Not needed if using PoH remote power from transmitter
3.
HDBaseT IN: Connect from the transmitters HDBaseT port with a network cable
4.
HDMI OUT: HDMI output port for connection to the display device.
5.
IR IN: IR Receiver. Connect with included cable.
6.
IR OUT: IR Transmitter. Connect with included cable.
7.
RS-232: Phoenix jack, provides Serial port control signal from receiver or to receiver.
8.
Connection Signal Indicator Lamp
※Illuminated: The Transmitter and Receiver have a good connections status.
※Flashing: The Transmitter and Receiver have a poor connections status.
※Off: The Transmitter and Receiver are not connected.
9.
Data Signal Indicator Lamp
※Illuminated: The HDMI signal has HDCP.
※Flashing: The HDMI signal has no HDCP.
※Off: No HDMI signal
English
Advertisement
