Advertisement
User Manual
Custom serial commands are also available below:
Command
s factory reset!
r version!
r power!
s power on!
s power off!
r lock!
s lock on!
s lock off!
s beep on!
s beep off!
r source!
s source 1!
r auto switch!
s auto switch mode 1!
s auto switch off!
r output!
s output 1!
r hdcp!
s hdcp bypass!
s hdcp 1.4!
r contrast!
s contrast 0!
r brightness!
s brightness 0!
r color!
s color 0!
r sharpness!
s sharpness 0!
r aspect ratio!
help!
xyz!
Enable auto switch function(1: Last connected source mode,
2: First connected source mode, 3: Priority source mode)
r tint!
s tint!
Read current input source output picture aspect ratio
Description
Display all communication commands
Return to factory reset setting
Read current FW version
Upgrade the switch FW
Read the switch power on/off status
Power on the switch
Power off the switch
Read the switch panel lock status
Lock on the panel control
Lock off the panel control
Enable the switch Beep
Disable the switch Beep
Read current input source
Switch HDMI1 input(1:HDMI1,2:HDMI2,
3:HDMI3,4:DisplayPort,5:VGA/YPBPR/C-VIDEO)
Read auto switch function status
Disable auto switch function
Read output resolution
Setup output resolution at 3840x2160@30Hz
(1:3840x2160@30Hz,2:3840x2160@25Hz,
3:1920x1080@60Hz,4:1920x1080@50Hz,
5:1280x720@60Hz,6:1280x720@50Hz,
7:1920x1200@60Hz,8:1680x1050@60Hz,
9.1400x1050@60Hz,10.1360x768@60Hz,
11.1280x800@60Hz,12.1024x768@60Hz,
13.Out display EDID native resolution
Read HDMI/HDBT output hdcp enable status
Set HDMI/HDBT output to hdcp pass through mode
Set HDMI/HDBT output to hdcp1.4 version
Read picture contrast status
Setup picture contrast 0(range:0-100)
Read picture brightness status
Setup picture brightness 0(range:0-100)
Read picture color status
Setup picture color 0(range:0-60)
Read picture sharpness status
Setup picture sharpness 0(range:0-20)
Read picture tint status
Setup picture tint 0(range:0-100,for CVBS
NTSC format only)
English
Advertisement
