Advertisement
User Manual
English
Web GUI Control
The switch can be controlled via a Web browser, which contains General, Setup and Network Settings.
After the active Ethernet link
with a RJ45
cable is connected, the IP address is entered in the Web
browser.
If the IP address is unknown,
there are two methods to obtain the IP address.
1. Obtain the IP address and port number via the information from the MENU-> Network OSD using the
remote control.
2. Obtain the IP address and port number via the RS-232 Control software.
For example, the obtained IP address is 192.168.1.100. Input http://192.168. 1.100 in the address bar of
the web browser.
1) General
2) Video
Advertisement
