Advertisement
User Manual
English
3) IR (20KHz---60KHz) cable pinout
Auto-Switching function
The switch has auto-switching and manual-switching modes. When in auto-switching mode, it will follow
the following principles:
New input: Once a new input signal is detected, the switch will switch to this new signal automatically.
Power reboot: The switch offers the function to remember the signal last used before power off. Once
rebooted, it will automatically enter auto-switching mode, and then detect all inputs and memorise their
connection status for future reboots. If the last used input signal is still available, then it will choose that
signal. If not, it will detect all input signals with priority on HDMI1->HDMI2->HDMI3->DP->VGA
(YPbPr/CVBS).
Removed Signal: Once the current signal is removed, the switch will detect all input signals with priority
on HDMI1->HDMI2->HDMI3->DP->VGA (YPbPr/CVBS). It will transfer the first signal detected to the
output.
Notice: The Auto-switching function works only when there is a new input signal or if an input signal is
removed.
VGA/YPbPr/CVBS input
The VGA input port is a multiple format port. It supports VGA/YPbPr/CVBS input signals. The switch will
auto detect the input signal type and format. You can use the converter cable for YPbPr or CVBS signal
inputs.
Advertisement
