Picture Tube Removal - Sony Multiscan GDM-2036S Service Manual

2-10. PICTURE TUBE REMOVAL
@
anode cap
• REMOVAL OF ANODE-CAP
• REMOVING PROCEDURES
<D
Turn up one side of the rubber cap in the
direction indicated by the arrow
®.
• HOW TO HANDLE AN ANODE-CAP
<D
Don't damage the surface of anode-
cap with sharp objects.
@ Don't press the rubber too hard or
you may damage the inside of the
anode-cap I
A metal fitting called a shatter-hook
terminal is built into the rubber.
<ID
Don't tum the foot of the rubber
over too hard I
The shatter-hook terminal will stick
out and may damage the rubber.
@
towscrews
(TA 5
x
20)
@
towscrews
(TA5
x
20)
GDM-2036S
ill
ABC shield
®
Cboard
®
neckA'ssy
(J)
deflection yoke
®
picture tube
@ Using a thumb pull up the rubber cap
firmly in the direction indicated by the
arrow@.
-19-
Anode button
<ID
When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling up it in the
direction of the arrow @ .