Picture Tube Removal - Sony TRINITRON Multiscan GDM-W900 Service Manual

GDM-W900
2-10. PICTURE TUBE REMOVAL
@ Open the D blook
(Refer 2-2.) © Four screws
ae (+- BV tapping screw M4 x 8)
CN6010 |
@ Three connector
2P (DY) | ~ ny
NS
Y; |
SN
(2) Open the G blook
Deflection yoke
Top cover
* REMOVAL OF ANODE-CAP
NOTE:
Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT, after
removing the anode.
* REMOVING PROCEDURES
Anode Button
«HOW TO HANDLE AN ANODE-CAP
@ Don't hurt the surface of anode-caps with shartp shaped material!
@) Don't press the rubber hardly not to hurt inside of anode-caps!
A material fitting called as shatter-hook terminal is builtinthe
==
_ oe
rubber.
The shatter-hook terminal will stick out or hurt the rubber.
2249S