Sony Multiscan GDM-2036S Service Manual page 12

GOM-2036S
When Adjustment Is Completed (Storing the Adjusted Condition)
When step 3 (on page 10) is completed, the adjusted display condition is stored in
memory under the following conditions:
• When you select another adjustment item by pressing the SELECT button.
• When 5 seconds have elapsed after adjustment and the
-'0:
indicator is lit.
The upper 4 adjustment items listed below are stored for each different input signal of
up to 15 types.
The lower 4 adjustment items are stored independently from the types of input
signals.
Adjustment item
How stored
H-SIZE They are stored together with the type of the
(horizontal size) input signal.
H-CENT The adjusted condition for up to 15 different input
(horizontal position) signals can be stored.
V-SIZE The stored condition is called back from memory
(vertical size) when the corresponding signal is input, and the
V-CENT optimum display is obtained for this signal.
(vertical centering)
() (contrast) They are stored independently from the input
-f:/- (brightness)
signal.
H-STAT Normally adjust the convergence when red and
(horizontal static blue colors are shifted due to the direction of the
convergence)
unit, or by being affected by the terrestrial
V-STAT
magnetism.
(vertical static convergence)
When the 16th condition is stored
The condition stored first is replaced by the 16th.
Care should be taken when a number of different conditions are to be stored.
If you modify the condition for the preset-type models
It also will be stored in memory. When called back from memory, priority is given to
the modified condition. When the stored conditions are cleared, the factory-preset
conditions return.
-12-