Selecting A Delayed Start; Interrupting A Programme; Aborting A Programme Before Time - V-ZUG Unimatic TSL WP Operating Instructions Manual

6.7

Selecting a delayed start

Wolle
max. 1 kg Wolltextilien
▸ Immediately after programme selection, hold the
peatedly until the required delayed start duration (max. 24 hours) appears in the dis-
play.
– The display goes dark.
– When the set duration is up, the programme selected starts automatically.
Adding more washing to the load
Items of washing may be added to the load at any time during the countdown to the
delayed start:
▸ Open the appliance door, add the washing to the load and then close the appliance
door again.
▸ Press the flashing programme button.
Shortening/Clearing the delayed start duration
During the countdown to the delayed start, press the
hourly steps) or clear the duration.
6.8

Interrupting a programme

A running programme can be interrupted at any time to add or remove an item of wash-
ing before time.
After the appliance door is closed, the heat pump waits 10 minutes before starting
again and the programme duration is correspondingly lengthened.
▸ Open the appliance door.
– The indicator light for the programme selected illuminates.
– The programme name and time remaining or delayed start period flash in the dis-
play.
▸ Close the appliance door (pushing firmly to).
– The indicator light for the programme selected flashes.
▸ Press the flashing programme button.
– The programme continues.
6.9

Aborting a programme before time

▸ Press the button.
– The programme is aborted and all settings are cleared.
1h35
button depressed or press re-
button repeatedly to shorten (in
6 Drying
21