Ruckus Wireless SmartCell Gateway 200 Getting Started Manual page 68

NOTE: Before creating a hotspot, you need to create a user defined interface. For
information on how to create a user defined interface, see the Administrator Guide.
A hotspot service requires an AAA server. Before creating a hotspot service, make
sure you have already added an AAA server to the SCG. For more information, refer
to Adding an AAA
Follow these steps to create a hotspot service for an AP zone.
1 Go to Configuration > AP Zones.
2 Click the AP zone for which you want to create a Hotspot service. Alternatively,
click the AP zone from the Management Domains tree.
3 Under the AP Zones menu on the sidebar, click WISPr (Hotspot).
4 Click Create New. The Create New Hotspot Service form appears.
5 Configure the hotspot service settings listed in
Table 13. Hotspot (WISPr) service settings
Setting
General Options
Name
Description
Redirection
Smart Client Support
Logon URL
Redirected MAC Format
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.4, 800-71126-001 Rev A
Server.
Description
Type a name for this new Hotspot service that you are
creating.
Type a description for this new Hotspot service (for
Main Office Lobby ).
example,
• None : Click to disable Smart Client support.
Enable : Click to enable Smart Client support.
•
Only Smart Client allowed : Click to allow only
•
Smart Clients to access this hotspot service.
Type the URL of the subscriber portal (the page where
hotspot users can log in to access the service). For more
information, see the section "Configuring the Logon
URL" in the Administrator Guide.
Enter the format used to include the client's MAC
address inside the redirected URL request.
Configuring the SCG for the First Time
Configuring AAA Servers and Hotspot Settings
Table 13.
68