Table of Contents
Advertisement
FEED EDGE
The values indicate the feed edge to use. Feeds paper so that Leading Edge of paper is the shorter side.
PJL COMMENT Command
@PJL COMMENT OID_ATT_FEED_EDGE
string;
Where string is:
OID_VAL_FEED_EDGE_SHORT_LEADING
OID_VAL_FEED_EDGE_SHORT_TRAILING
OID_VAL_FEED_EDGE_LONG_LEADING
OID_VAL_FEED_EDGE_LONG_TRAILING
BINDING
BINDING defines along which edge a duplex page is flipped. In portrait orientation, LONGEDGE binding indicate pages turn
as in a book, SHORTEDGE binding indicates pages turn as those in a flip chart. In printing/graphic arts nomenclature,
SHORTEDGE is analogous to DUPLEX TUMBLE. BINDING is ignored if the document is simplex.
PJL SET
@PJL SET BINDING= string
Where string is:
SHORTEDGE
LONGEDGE
SIMPLEX / DUPLEX PRINTING
This command specifies if a job is to print on one side or both sides of the sheet. Choose one of the methods below for
indicating this feature.
Short edge bind (Duplex Tumble ON) = Duplex so that when page is rotated about the short edge, second side image is right
side up.
Long edge bind (Duplex Tumble OFF) = Duplex so that when page is rotated about the long edge, second side image is right
side up.
PJL COMMENT Cmd
@PJL COMMENT
OID_ATT_PLEX
OID_VAL_PLEX_string;
Where string is:
SIMPLEX = simplex
DUPLEX = duplex
dc10cc0465
Customer Support
DSC Comment Command
%% OID_ATT_FEED_EDGE
string;
DSC Comment Cmd
%%OID_ATT_PLEX
OID_VAL_PLEX_string
;
PS Set Page
/Leading Edge integer or null
null = use default orientation for
specified PageSize to select which
edge is the top of the page.
0 = Short edge, leading edge is the
top of the page.
2 = Short edge, trailing edge is the
top of the page.
PCL Cmd
PCL5
PCL6
<esc> &lintS
DuplexPageMode
(53)
Where int is:
0 = Simplex
1 = Duplex Long Edge Binding
2 = Duplex Short Edge Binding
PS Cmd
<</Duplex true
/Tumble string >>
Where string is:
true
false
Page 13
Advertisement
Table of Contents
