Table of Contents
Advertisement
XRXBegin
When the interpreter receives this command it begins to parse PJL COMMENT commands to check for Xerox-specific
commands until it receives the command to stop parsing.
PJL COMMENT Command
@PJL COMMENT XRXbegin
XRXEnd
When the interpreter receives this command it stops parsing PJL COMMENT commands.
PJL COMMENT Command
@PJL COMMENT XRXend
General Comment Commands
JOB NAME
The value for Job Name is stored for printing on the banner page.
PJL COMMENT Command
@PJL COMMENT JOB NAME="string";
Where string is a maximum of 40 characters. This appears as the first item on the banner sheet.
JOB OWNER
The value for Job Owner is stored for printing on the banner page.
PJL COMMENT Command
@PJL COMMENT
OID_ATT_JOB_OWNER "string";
Where string is a maximum of 40 characters. This appears as the second item on the banner sheet.
COPIES
Use this command to specify the number of non-collated sets of a document in a print job. With COPIES specified, the
device renders X number of copies of page 1 of the document, X number of copies of page 2, and so on. Use the
COLLATION command in conjunction with the COPIES command to set a collate value.
PJL SET
@PJL SET COPIES=int;
Where int is 1 to 9999.
dc10cc0465
Customer Support
DSC Comment Command
%%XRXbegin
DSC Comment Command
%%XRXend
DSC Comment Command
%%OID_ATT_JOB_NAME="string";
DSC Comment Command
%%OID_ATT_JOB_OWNER "string";
PCL Cmd
uint16 int ubyte pagecopies
PS Cmd
<</NumCopies int>>
Page 5
Advertisement
Table of Contents
