(8) Turn four Compression springs 22 (the upper two are shorter than the lower two) used as vibration damper counterclockwise and then
remove them. (Fig. 6)
(9) Loosen eleven 5x20 Tapping screws and then remove Rear volute case (i). Remove Elbow (j) together with it. (Fig. 7)
Fig. 6
(10) Loosen the four M6x25 Hex socket head bolts and then remove fan (k). (Fig. 8)
Fig. 8
(h)
Lower
Upper
1
3
4
(k)
2
Makita Corporation
Fig. 7
(i)
(j)
P 6/ 35