Makita EB7650TH Technical Information page 10

[3]-3. Throttle Lever Section
EB7650TH
Disassembly
(1) Remove M5x30 thumb screw (a). (Fig. 15)
(2) Loosen five 4x18 Tapping screws and then remove Lever case R (b). (Fig. 15)
(3) Remove the head of Control cable (c) from Throttle lever A (d) and then remove the lever. (Fig. 15)
(4) Remove Throttle link (e), disconnect the connector of Switch unit, and then replace Switch unit.
(5) Loosen M4x18 Hex socket head bolt and remove Throttle lever B (f). (Fig. 16)
Fig. 15
(a)
Assembly
・Attach Throttle link (e) at the position shown in Fig. 16. First secure Throttle lever B (f) with the screw and then turn it counterclockwise
(viewed from the inside) to press the lever of Switch unit and then attach Throttle lever A (d).
Lever case L
Switch unit
(d)
(b)
Makita Corporation
Fig. 16
(c) (d)
P 10/ 35
(f) is on the back.
(e)