Searching The Boundaries Of Recorded Tape By Title - Title Search - Sony DCR-IP210 Operating Instructions Manual

Searching the boundaries of recorded
tape by title – TITLE SEARCH
You can search for the boundaries of a recorded tape by selecting the title. Use the
Remote Commander for this operation.
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the TITLE
SEARCH indicator appears.
The indicator changes as follows:
(3) Press X or x on the Remote Commander to select the title for playback, then
press EXECUTE on the Remote Commander.
Searching the boundaries starts, and playback automatically starts at the scene
with the title selected. Even if you do not press EXECUTE, searching the
boundaries starts automatically in two seconds after you select the title.
2
SEARCH
MODE
3
[a] Actual point you are trying to search for
[b] Present point on the tape
To stop searching
Press STOP on the Remote Commander.
If a tape has a blank portion in the beginning of the tape or between recorded
sections
The title search function may not work correctly.
To superimpose a title
See page 88.
78
TITLE SEARCH t DATE SEARCH
(no indicator)
TITLE SEARCH
1 HELLO!
2 CONGRATULATIONS!
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
TITLE SEARCH
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
7 NIGHT
8 BASEBALL
[b] [a]