Sony DCR-IP210 Operating Instructions Manual page 109

Using a "Memory Stick" – Introduction
Selecting the size of still image
You can select either of two still image sizes.
1600 1200 or 640 480. (When the POWER switch is set to CAMERA or VCR,
the image size is automatically set to 640 480.)
The default setting is 1600
(1) Set the POWER switch to MEMORY.
(2) Press FN to display PAGE1.
(3) Press MENU, then select STILL SET (still image) in
then press EXEC (p. 181).
(4) Press r/R to select IMAGESIZE, then press EXEC.
(5) Press r/R to select the desired image size, then press EXEC.
The indicator changes as follows:
1600
2
FN
3-5
MENU
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
Note
When still images recorded on your camcorder in 1600 1200 size are played back on
other equipment that does not support 1600 1200 size, the full image may not appear.
1200.
640
MEMORY SET
EXIT
STILL SET
BURST
OFF
QUALITY
IMAGESIZE
EXEC RET.
in the menu setting,
1
EXIT MEMORY SET
640
STILL SET
BURST
QUALITY
IMAGESIZE
1600 1200
640 480
REMAIN
40
EXEC RET.
POWER
EXIT
640 480
REMAIN
40
EXEC RET.
109