Searching A Recording By Date - Date Search - Sony DCR-IP210 Operating Instructions Manual

Searching a recording by date
– DATE SEARCH
Your camcorder automatically searches for the point where the recording date changes
and starts playback from that point by selecting the recording date (Date search).
Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Searching for the date by using cassette memory
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the DATE
SEARCH indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH
(3) Press X or x on the Remote Commander to select the date for playback, then
press EXECUTE on the Remote Commander.
Searching the boundaries starts, and playback automatically starts at the scene
with the date selected. Even if you do not press EXECUTE, searching the
boundaries starts automatically in two seconds after you select the date.
2
DATE SEARCH
1 SEP/ 5/ 02
SEARCH
2 SEP/ 6/ 02
MODE
3 DEC/24/ 02
4 JAN / 1/ 03
5 FEB /11/ 03
6 APR/29/ 03
3
[a] Actual point you are trying to search for
[b] Present point on the tape
To stop searching
Press STOP on the Remote Commander.
If a tape has a blank portion in the beginning of the tape or between recorded
portions
The date search function may not work correctly.
micro Cassette Memory
The tape cassette memory can hold 20 recording date data.
(no indicator)
DATE SEARCH
1 SEP/ 5/ 02
2 SEP/ 6/ 02
3 DEC/24/ 02
4 JAN / 1/ 03
5 FEB /11/ 03
6 APR/29/ 03
[b] [a]
79