Sony DCR-IP210 Operating Instructions Manual page 126

Superimposing a still image in a "Memory Stick" on an image
– MEMORY MIX
Recording a superimposed image to a tape
Before operation
•Insert a tape for recording into your camcorder.
•Insert a "Memory Stick" recorded with still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press FN and go to PAGE2.
(3) Press MEM MIX. The last image recorded on the "Memory Stick" appears on
(4) Press –/+ on the right lower corner of the LCD screen to select the still image
(5) Press a desired mode. The still image is superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the LCD screen to adjust the effect, then
(7) Press EXIT to return to FN.
(8) Press START/STOP to start recording.
2
FN
PAGE2
126
the right lower part of the LCD screen.
which you want to superimpose.
– : To see the previous image
+ : To see the next image
press OK to return to PAGE2.
M. CHROM: Blue chroma key (only blue background portion) to extract a
still image and superimpose it on a moving picture
M. LUMI: Brightness level used when extracting a still image and
superimposing it on a moving picture
C. CHROM: Blue chroma key (only blue background portion) to extract a
moving picture and superimpose it on a still image
M. OVERLAP: No adjustment necessary
The fewer bars there are on the LCD screen, the stronger the effect.
3,4
MEM MIX
MEM
CAMCM
M I X
CHROM
5
MEM MIX
M. LUMI
– +
–
6
MEM MIX
M. LUMI
– +
–
OFF MCCAM OVER– OK
LUMI LAP
MCCAM
Still image
CHROM
100–0001
– +
OFF OK
100–0001
+ – +
OFF OK
100–0001
+ – +