Recording An Image From A Tape As A Still Image - Sony DCR-IP210 Operating Instructions Manual

Recording an image from a tape as a still
image
Your camcorder can read moving picture data from other equipment recorded on a tape
and record it as a still image on a "Memory Stick."
Your camcorder can also take in moving picture data from other equipment through the
input connector and record it as a still image on a "Memory Stick."
Before operation
•Insert a recorded tape into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
CAPTURE appears on the LCD screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed on the LCD screen will be
recorded on a "Memory Stick." Recording is complete when the bar scroll
indicator disappears.
3
2
. The picture recorded on the tape is played back.
SFN
1 / 40
640
FN
4
SFN
640
FN
121