Overview And Warnings - Structural Concepts Harmony HMG2642R.4439 Installation & Operating Manual

OVERVIEW AND WARNINGS

OVERVIEW
•
These Structural Concepts Harmony® service cases are designed to merchandise packaged products
at 41°F or less product temperatures.
•
These cases should be installed and operated according to this operating manual's instructions to
insure proper performance. Improper use will void warranty.
This unit is designed for the display of products in ambient store conditions where temperatures and
humidity are maintained within a specific range.
•
For NSF® Type 1 Conditions (most cases): ambient conditions are to be at 55% max. humidity / 75°F.
•
For NSF® Type 2 Conditions: ambient conditions are to be at 60% maximum humidity / 80°F.
•
If unsure if your case is Type 1 or Type 2, contact Structural Concepts Technical Service (see
Technical Service section in this manual for phone number).
Caution: Do not allow air conditioning, electric fans, open doors or windows to create air currents
around display case as this may detrimentally affect proper case temperatures and operation.
WARNING
ELECTRICAL
HAZARD
WARNING
ELECTRICAL
HAZARD
WARNING
KEEP HANDS
CLEAR
WARNING
HOT
SURFACE
CAUTION
ATTENTION INSTALLER
This equipment must be installed in compliance with all
applicable NEC, federal, state and local plumbing codes.
Risk of electric shock.
Disconnect power before servicing unit
More than one source of electrical supply is employed
with units that have separate circuits.
Disconnect all sources before servicing.
Hazardous moving parts. Do not operate unit with covers removed.
Fan blades may be exposed when deck panel is removed.
Disconnect power before removing deck panel.
Evaporator Pan is Hot! Disconnect and allow to cool
before cleaning or removing from case.
Lamps have been treated to resist breakage
and must be replaced with similarly treated lamps.
4
WARNING
WARNING
WARNING
WARNING
CAUTION