Reviewing The Rhythm Report Settings - Welch Allyn CP 200 Directions For Use Manual

Directions for Use

Reviewing the Rhythm Report Settings

1. Press the Menu key
2. Choose ECG Settings > Rhythm Report Settings.
The following screen appears.
Figure 30. "Rhythm Report Settings" Menu
Rhythm Report Settings
1 Lead Arrangement
2 Default Rhythm Speed
3 Standard Lead Order
4 Augmented Lead Order
0 Previous Menu
3. Change any desired settings.
Setting
Lead Arrangement
Default Rhythm Speed
Standard Lead Order
Augmented Lead Order
.
9:17AM Oct 16 08
Description
Choose the number of leads you want to print at a time: 3, 6, or 12.
For instructions on cycling through 3-lead or 6-lead groupings while printing a rhythm
report, see Step 2 on page 63.
Choose the default rhythm speed: 10, 25, or 50 mm/s.
Configure the order in which leads appear during rhythm printing when the standard
lead set is in use.
Configure the order in which leads appear during rhythm printing when the
augmented pediatric lead set is in use. For electrode placement locations, see
Figure 33 on page 54.
Chapter 4 Reviewing the ECG Settings 47