Reviewing The Spirometry Screen Settings - Welch Allyn CP 200 Directions For Use Manual

16 Chapter 2 Reviewing the Spirometry Settings

Reviewing the Spirometry Screen Settings

The spirometry screen is the first screen that displays after you enter patient data.
For example, see
follow these steps.
1. Press the Menu key
2. Choose Spirometry Settings > Screen Settings.
The following screen appears.
Figure 4. "Spirometry Screen Settings" Screen
Spirometry Screen Settings
1 Select Default FVC Curve
2 Select FVC Display Parameters
0 Previous Menu
3. Change any desired settings.
Setting
Select Default FVC Curve
Select FVC Display
Parameters
Figure 28 on page 41. To review or change the settings for this screen,
.
9:17AM Oct 16 08
Description
Choices: volume/time, flow/volume, tidal volume, incentive. The selected default
curve appears first whenever you begin FVC testing.
Choose which FVC-test parameters to display during testing.
Choices (up to eight): FVC, FEV1, FEV1%, FEV6, PEF, FEF25-75, FEV0.5, FEV2, FEV3,
FEV5, FEV1/FEV6, FEV0.5%, FEV2%, FEV3%, FEV5%, FEV6%, FEF25, FEF50, FEF75,
FEF0.2-1.2, FEF75-85, FET, FIVC, FIV1, FIV1%, PIF, FIF50, FEF50/FIF50.
Note: For SVC testing, these parameters always display: SVC, ERV, IRV, VT, BF, Tin/
Tex.
Welch Allyn CP 200 Spirometry Option