Public Switch: Arista 7050Sx-64; Arista 7050Sx-64 Ports; 7050Sx-64 Switch Port Connections Used On The Top 10 Gbe Switch (Hare); 7050Sx-64 Switch Port Connections Used On The Bottom 10 Gbe Switch (Rabbit) - Dell EMC ECS D Series Hardware Manual

Switches

Public switch: Arista 7050SX-64

D- and U-Series Hardware Guide
38
The 7050SX-64 switch is a 52-port switch. The switch is equipped with 52 SFP+
ports, dual hot-swap power supplies, and redundant, field-replaceable fan modules.
Figure 12 Arista 7050SX-64 ports
Table 23 7050SX-64 switch port connections used on the top 10 GbE switch (
Figure label Ports
1 1–8
2 9–32
3 33–44
4 45–48
5 49–52
6 <...>
7 Serial console The console port is used to manage the switch through a
Table 24 7050SX-64 switch port connections used on the bottom 10 GbE switch (
Figure label Ports
1 1–8
2 9–32
3 33–44
4 45–48
5 49–52
Connection description
The 10 GbE uplink data ports. These ports provide the
connection to the customer's 10 GbE infrastructure. SR Optic.
See note.
The 10 GbE node data ports, only ports 9–16 are used in the
U- and D-Series. These ports are connected to the left 10 GbE
(P02) interface on each node. SR Optic.
Unused.
The 10 GbE LAG ports. These ports are connected to the LAG
ports on the other 10 GbE switch (
Unused.
The 1 GbE management port. This port is connected to port
50 of the management switch (
serial connection. The Ethernet management port is
connected to the 1 GbE management switch.
Connection description
The 10 GbE uplink data ports. These ports provide the
connection to the customer's 10 GbE infrastructure. SR Optic.
See note.
The 10 GbE node data ports, only ports 9–16 are used in the
U- and D-Series. These ports are connected to the right 10
GbE (P01) interface on each node. SR Optic.
Unused.
The 10 GbE LAG ports. These ports are connected to the LAG
ports on the other 10 GbE switch (
Unused.
hare )
rabbit ). SR Optic.
turtle ). RJ-45.
rabbit )
hare ). SR Optic.