Rack And Node Host Names; Rack Id 1 To 50; Default Node Names - Dell EMC ECS D Series Hardware Manual

Servers

Rack and node host names

D- and U-Series Hardware Guide
30
2. RMM: A dedicated port for hardware monitoring (per node)
3. SAS to DAE. Used on U- and D-Series servers only. U-Series Gen1 has a single
port. U-Series Gen2 hardware has two ports. The D-Series has one high density
SAS cable with one connector.
hare ): The left 10 GbE data port of each node is connected to one of
4. 10 GbE SW2 (
the data ports on the 10 GbE (SW2) switch
rabbit ): The right 10 GbE data port of each node is connected to one
5. 10 GbE SW1 (
of the data ports on the 10 GbE (SW1) switch
Lists the default rack and node host names for an ECS appliance.
Default rack IDs and color names are assigned in installation order as shown below:
Table 17 Rack ID 1 to 50
Rack Rack color
ID
1 red
2 green
3 blue
4 yellow
5 magenta
6 cyan
7 azure
8 violet
9 rose
10 orange
11 chartreuse
12 pink
13 brown
14 white
15 gray
16 beige
17 silver
Nodes are assigned node names based on their order within the server chassis and
within the rack itself. The following table lists the default node names.
Table 18 Default node names
Node Node name
1 provo
Rack Rack color
ID
18 carmine
19 auburn
20 bronze
21 apricot
22 jasmine
23 army
24 copper
25 amaranth
26 mint
27 cobalt
28 fern
29 sienna
30 mantis
31 denim
32 aquamarine
33 baby
34 eggplant
Node Node name
9 boston
Rack Rack color
ID
35 cornsilk
36 ochre
37 lavender
38 ginger
39 ivory
40 carnelian
41 taupe
42 navy
43 indigo
44 veronica
45 citron
46 sand
47 russet
48 brick
49 avocado
50 bubblegum
Node Node name
17 memphis