Dell EMC ECS D Series Hardware Manual page 14

Hardware Components and Configurations
D- and U-Series Hardware Guide
14
Table 3 C-Series hardware components (continued)
Component
Private switch
Public switch
Nodes
Disks
Service tray
Description
Optional two three-phase WYE or delta PDUs in a 2U
l
configuration with two power drops
Front and rear doors
l
Racking by Dell EMC manufacturing
l
One or two 1 GbE switches. The second switch is required for
configurations with more than six servers.
Two or four 10 GbE switches. The third and fourth switches
are required for configurations with more than six servers.
Intel-based unstructured servers in 8- through 48-node
configurations. Each server chassis contains four nodes
(blades).
The C-Series has 12 3.5-inch disk drives integrated with each
server. Gen1 hardware uses 6 TB disks. Gen2 hardware uses 8
TB disks.
50-lb capacity service tray