1.4 Introduction of main modules
1)
Button (6) and LED (5): indicate the printer status and complete
printing function;
2)
Paper roll supporting pole (8) and paper guide plate (7): support
the paper roll to avoid left and right shaking of paper roll;
3)
Paper guide block (15): avoid left or right shaking of paper in
the paper out path;
4)
Power switch (22): press "O" to power off and press "-" to
power on.
5)
Sensor is installed inside the sensor holder (16) to realize the
paper calibration, detection and positioning.
LP 46 Neo User's Manual
- 4 -